S 26 33.8 E 152 57.3
Arriving from the west, there are two VFR approach points, Nambour and Yandina township. Both of these are relatively close to the control zone boundary itself, so you are advised to make your inbound call to the Tower 5nm to the west of either of these two reporting points to allow more time for ATC to arrange your clearance.
Once you are cleared into the zone, you may be asked to report again when crossing the Sunshine Motorway, immediately west of the airport. Follow ATC instructions for joining the circuit.
No taxi clearance required. Monitor Ground on 121.1MHz.
Taxi clearance from Ground required before entering this area.
Specific clearance required from ATC before entering this area.
An area on the aerodrome intend to accommodate aircraft for the purpose of loading or unloading passengers, cargo, fueling, parking or maintenance.
That part of the aerodrome to be used for take-off, landing and taxiing aircraft, <strong>excluding</strong> aprons.
That part of the aerodrome to be used for take-off, landing and taxiing aircraft, consisting of the manoeuvring area and the apron.